Building hand burner BHB
We are your complete supplier
for liquid gas fittings and burners
Building hand burner BHB
Hand torch for drying, laying roofing membranes, thawing and scarfing
Series 51
- Gas inlet G3/8LHa
- Burner hood Ø 40 mm
- Extension 250 mm
- Power from 27 to 45 kW
(from 1.5 bar to 4.0 bar)
| Article | ø hood in mm | Length in mm | Order no. |
|---|---|---|---|
Construction hand torch G3/8LHa 40-250 | 40 | 570 | 5142 |
| Lorem | Lorem |
- Ø burner hood 40, 50 and 60 mm
- Extension 600 mm
- Power from 27 to 133 kW
(from 1.5 bar to 4.0 bar and from burner hood 40 to 60)
| Article | ø hood in mm | Length in mm | Order no. |
|---|---|---|---|
Construction hand torch G3/8LHa 40-600 | 40 | 630 | 5146 |
| Construction hand torch G3/8LHa 50-600 | 50 | 660 | 5156 |
| Construction hand torch G3/8LHa 60-600 | 60 | 730 | 5166 |
| Construction hand torch G3/8LHa 60-600 PZ (w/o fig.) | 60 | 730 | 5167 |
| Lorem | Lorem |
(Subject to technical changes)
Performance and consumption overview
| Pressure | Consumption | Power | |
|---|---|---|---|
Hood 40 | 1.5 bar | 2.2 kg/h | 27 kW |
| | 2.5 bar | 2.8 kg/h | 35 kW |
| | 4.0 bar | 3.5 kg/h | 45 kW |
Hood 50 | 1.5 bar | 4.0 kg/h | 50 kW |
| | 2.5 bar | 5.2 kg/h | 65 kW |
| | 4.0 bar | 6.5 kg/h | 83 kW |
Hood 60 | 1.5 bar | 6.3 kg/h | 80 kW |
| | 2.5 bar | 8.2 kg/h | 105 kW |
| | 4.0 bar | 10.0 kg/h | 133 kW |
| Lorem | Lorem |
1. function
The propane flows via the economy handle to the main shut-off valve. The valve shuts off the gas supply. When the valve is opened, a certain amount of gas flows through the set bypass. The bypass opening adjustment screw is located just upstream of the main shutoff valve and is sealed in its setting. It releases the gas path for the economy flame. The power flame is released by depressing the lever located below the main shutoff valve. The desired output can be set by depressing the power flame lever and adjusting the main shut-off valve. For safe storage of the burner, there is a stand on the extension tube which allows the burner to be stored in such a way that the pilot flame does not cause any danger.
2. start-up
- Connect the regulator with integrated hose rupture protection (RS) to the gas cylinder valve. (The connected load depends on the consumption of the burner) Connect burner inlet = G3/8LH (left-hand thread) with a high-pressure hose 6.3x5 (pressure class 30) to the RS (gas-tight).
- Open the cylinder valve
- Press the start button of the RS
- Open the economy valve completely
- Ignite propane at the burner head
- Press pilot lever = working flame
- Set the desired output with the main shut-off valve (propane quantity)
3. decommissioning
- Close the main shut-off valve on the burner handle.
- Close gas cylinder valve
- Vent the propane hose
4. technical guidelines
ISO 9012, BGV D1, BGV D34, BGV D16, GPSG
5. maintenance
The sealing washer in the screw connection on the inlet side of the RS must be checked for wear and the filter retaining screw must be checked for dirt (see also instructions for regulator and hose rupture protection).
Unauthorised repairs and interventions are not permitted.
Only an expert is allowed to change the gas quantity for the flame clamp adjustment. The adjusting screw must be sealed again after changes.
6. Single parts
| Article | Order no. |
|---|---|
BHB Burner handle G3/8LHa | 5403 |
Extension 250 | 5412 |
Extension 350 | 5413 |
Extension 600 | 5416 |
Storage foot | 5443 |
Burner head 40 | 5541 |
Burner head 50 | 5551 |
Burner head 60 | 5561 |
Operating instructions | 5100.0.99 |
| Lorem |
Building hand burner BHB
Hand torch for drying, laying roofing membranes, thawing and scarfing
Series 52
- Gas inlet G3/8LHa
- Ø burner hood 40 mm, 50 mm, 60 mm
- Extension 350 mm, 600 mm
- Power from 54 to 210 kW
(from 1.5 bar to 2.5 bar)
| Article | ø hood in mm | Length in mm | Order no. |
|---|---|---|---|
Construction burner G3/8LHa 40x2 - 350 | 40 | 660 | 5243 |
| Construction burner G3/8LHa 40x2 - 600 | 40 | 910 | 5246 |
| Construction burner G3/8LHa 50x2 - 350 | 50 | 670 | 5253 |
| Construction burner G3/8LHa 50x2 - 600 | 50 | 920 | 5256 |
| Construction burner G3/8LHa 60x2 - 350 | 60 | 690 | 5263 |
| Construction burner G3/8LHa 60x2 - 600 | 60 | 940 | 5266 |
| Lorem | Lorem |
Performance and consumption overview
| Pressure | Consumption | Power | |
|---|---|---|---|
Hood 40 | 1.5 bar | 4.4 kg/h | 54 kW |
| | 2.5 bar | 5.6 kg/h | 70 kW |
Hood 50 | 1.5 bar | 8.0 kg/h | 100 kW |
| | 2.5 bar | 10.4 kg/h | 130 kW |
Hood 60 | 1.5 bar | 12.6 kg/h | 160 kW |
| | 2.5 bar | 16.4 kg/h | 210 kW |
| Lorem | Lorem |
1. function
The propane flows via the economy handle to the main shut-off valve. The valve shuts off the gas supply. When the valve is opened, a certain amount of gas flows through the set bypass. The bypass opening adjustment screw is located just upstream of the main shutoff valve and is sealed in its setting. It releases the gas path for the economy flame. The power flame is released by depressing the lever located below the main shutoff valve. The desired output can be set by depressing the power flame lever and adjusting the main shut-off valve. For safe storage of the burner, there is a stand on the extension tube which allows the burner to be stored in such a way that the pilot flame does not cause any danger.
2. start-up
- Connect the regulator with integrated hose rupture protection (RS) to the gas cylinder valve. (The connected load depends on the consumption of the burner) Connect burner inlet = G3/8LH (left-hand thread) with a high-pressure hose 6.3x5 (pressure class 30) to the RS (gas-tight).
- Open the cylinder valve
- Press the start button of the RS
- Open the economy valve completely
- Ignite propane at the burner head
- Press pilot lever = working flame
- Set the desired output with the main shut-off valve (propane quantity)
3. decommissioning
- Close the main shut-off valve on the burner handle.
- Close gas cylinder valve
- Vent the propane hose
4. technical guidelines
ISO 9012, BGV D1, BGV D34, BGV D16, GPSG
5. maintenance
The sealing washer in the screw connection on the inlet side of the RS must be checked for wear and the filter retaining screw must be checked for dirt (see also instructions for regulator and hose rupture protection).
Unauthorised repairs and interventions are not permitted.
Only an expert is allowed to change the gas quantity for the flame clamp adjustment. The adjusting screw must be sealed again after changes.
6. Single parts
| Article | Order no. |
|---|---|
BHB Burner handle G3/8LHa | 5403 |
Extension 250 | 5412 |
Extension 350 | 5413 |
Extension 600 | 5416 |
| Fork M18x1.5S - 2x M12L | 5432 |
Storage foot | 5443 |
Burner head 40 | 5541 |
Burner head 50 | 5551 |
Burner head 60 | 5561 |
Operating instructions | 5200.0.99 |
| Lorem |